Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot 308 key fob stopped working one day it could be due to a dead battery in the coin, water damage and receiver module issues or a malfunctioning electronic chip. These are all simple solutions that will restore your car to speed in no time!
Car keys can also become faulty because the blade of the key gets worn. This can be fixed by visiting your local Car Key Man Auto Locksmith and let them install a new key blade for you.
Battery
The key fob on your Peugeot 308 may die or become weak enough to not transmit a strong signal. The key fob could not function and stop you from locking or unlocking your doors or even starting the engine. You'll require a new battery for your key fob to repair this.
You can buy a brand new battery at an auto parts store, or at your local hardware store. Make sure that the battery is brand new and has not on the shelf too long. A brand new battery has more capacity and will send a stronger signal to your car.
After replacing the battery try unlocking the doors and locking them using the key fob. If the doors won't open it is most likely to be in the receiver module of the car which can be programmed by your local Peugeot dealer.
It's possible that the key fob's internal chip has been damaged. You can cause damage to your key fob if you drop it on the ground, or expose it to moisture. The rubber seals that protect your chip from moisture might get worn out over time. This is especially the case if you expose your key fob to water over long periods of time, for example, swimming it in the ocean. To avoid this you must keep your key fob away of water and out of water.
Water Damage
Don't let go of your key fob when it gets wet, no matter if you dropped in the pool or slipped into a water puddle. Although the key fob is equipped with rubber seals that protect it from water, prolonged exposure to water could cause damage to the electronic chip. Since water is such an excellent conductor so any water that gets inside the key fob may cause a series of short circuits, which could eventually destroy the chip. After removing the batteries clean the contact surfaces with isopropyl and dry them completely before putting them back into.
A dead battery might be the reason that your Peugeot 308 won't start. Jumper cables can be a great option to restart the engine in case you have an additional vehicle. If peugeot 207 car key g28carkeys.co.uk is the issue then it must be replaced.
A malfunctioning receiver in the car may also block it from receiving the signal from the keyfob. The key fob may be damaged or there could be an issue with the antenna, wiring or the key fob itself. It might be necessary to programme a new key fob to your vehicle if you are using one. If you are unable to fix the issue on your own seek out an expert technician. A trained technician will be able diagnose the problem quickly and fix it promptly.
Radio Interference
Interference can cause symptoms such as a key fob that's not recognized or has a narrow range. It could be radiated or conducted, with the former being caused by power supply cables and the speaker wiring being too close to electrical components. In general, rerouting cables and moving them away from these components will resolve the problem.
It's unlikely someone is listening to your key fob signal in an attempt to steal your vehicle however it is possible that radio interference has slowed the signal. This is a simple problem to resolve.
If you're experiencing a problem with your key fob not being recognized, try using a new battery. Make sure that the battery is the right size and type. Batteries that aren't the correct dimensions can harm your battery.
These devices could interfere with the key signal if they use the same radio frequency. Do not connect these devices to your key fob.
Pairing Issues
A car's remote keyless entry system is an antenna that receives radio frequency signals from the key fob. If the receiver has developed an issue, you will not be able to start your car, even if the key fob works and is reprogrammed. The issue can be caused by a range of reasons, such as the battery of a coin that is dead and water damage. The receiver could be malfunctioning because of an error in the software or internal damage to the key itself.
The battery that powers your Peugeot 308 keyfob may have been drained. This battery can be easily replaced, but you must be sure it's the proper battery for your keyfob. It is recommended to use an item that has the same size in terms of voltage, size, and specifications as the original.
Another reason the reason your Peugeot 308 key fob might not work is because it has been paired to a different car. It is possible that you have accidentally given your key fob away to a friend or the key was used to unlock other vehicles. This can be fixed by reprogramming the key fob with an OBDII scan. This tool will request information about your vehicle, including its VIN or engine type. It is essential that you enter the correct details.